利用Kickstart自動化安裝CentOS的方法
前言
因為需要在浪潮的x86伺服器中集中部署CentOS搭建基於Hadoop的大資料平臺,平時接觸SLES(SuSE Linux Enterprise Server)較多並且已經實現基於Autoyast方式使用光碟或者PXE網路自動化安裝(後續會分享具體實現方法)。這次主要透過學習Kisckstart實現最簡單的光碟方式自動化安裝CentOS,而網上的大多數教程並不完全適用於自身的.環境,本文將不再贅述Kickstart相關概念,細節可參考擴充套件閱讀。
Kickstart是最為通用的Linux自動化安裝方法之一
環境準備
定製系統
CentOS-6.4-x86_64
官方下載地址 - http://wiki.centos.org/Download
安裝軟體包
代理上網小技巧,export http_proxy=ip:port
yum -y install createrepo mkisofs
製作流程
目錄結構
複製CentOS原始映象內容,不做任何精簡
mkdir /mnt/centos
mount /dev/sr0 /mnt/centos
mkdir /tmp/iso
cp -r /mnt/centos/* /tmp/iso
增加Kickstart配置檔案
檔案路徑和安裝方式可自由定義
cd /tmp/iso/isolinux
#修改引導,注意ks=部分
vi isolinux.cfg
label linux
menu label ^Install or upgrade an existing system
menu default
kernel vmlinuz
append initrd=initrd.img ks=cdrom:/isolinux/ks.cfg
#手動增加Kickstart配置檔案
vi ks.cfg
#Kickstart file automatically generated by anaconda.
#version=DEVEL
#Install OS instead of upgrade
#表示是安裝,而不是升級
install
#Use text mode install
#文字方式安裝
text
#Use network installation
#使用網路安裝
#url --url=ftp://ip/centos
#Local installation Use CDROM installation media
#使用光碟安裝
cdrom
#Installation Number configuration
#如果是RedHat的系統,會要求輸入key,這裡配置為跳過,如果不配置安裝時會停在那裡要求使用者輸入key
#key –skip
#System language
#語言環境
#lang en_US.UTF-8
lang zh_CN.UTF-8
#System keyboard
#鍵盤型別
keyboard us
#Network information
#網路配置
#network --device eth0 --bootproto dhcp --onboot yes
#Root password
#root密碼
rootpw chinaums
#Firewall configuration
#禁用防火牆
firewall --disabled
#SELinux configuration
#禁用selinux
selinux --disabled
#Run the Setup Agent on first boot
#禁用第一次啟動時設定系統的嚮導
firstboot --disable
#System authorization information
#使用者認證配置,useshadow表示使用本地認證,--passalgo表示密碼加密演算法
authconfig --enableshadow --passalgo=sha512
#System timezone
#設定時區為上海
timezone --isUtc Asia/Shanghai
#System bootloader configuration
#指明bootloader的安裝位置,指明驅動器的排序,指明作業系統安裝完成之後,向核心傳遞的引數
bootloader --location=mbr --driveorder=sda --append="crashkernel=auto rhgb quiet"
#Clear the Master Boot Record
#清除MBR引導記錄
zerombr yes
#Partition clearing information
#清除硬碟上的所有資料
clearpart --all --initlabel
#Disk partitioning information
#自定義分割槽
#建立一個200M大小的分割槽掛載/boot型別為ext4
part /boot --fstype=ext4 --size=200 --ondisk=sda
#建立一個20000M大小的SWAP分割槽
part swap --size=20000 --ondisk=sda
#建立/目錄
part / --fstype=ext4 --grow --size=1 --ondisk=sda
#Reboot after installation
#設定完成之後重啟
reboot --eject
#This packages is for CentOS 6.4
#為CentOS 6.4定製的軟體包
%packages
@base
@core
@chinese-support
#增加安裝後執行指令碼
%post
#config service
#自定義服務
service NetworkManager stop
chkconfig NetworkManager off
#eject cdrom
#安裝完成彈出光碟
#eject
#reboot
#執行完畢後重啟
#reboot -f
#結束自動化部署
%end
生成依賴關係和ISO檔案
注意路徑和命令的準確性
cd /tmp/iso
createrepo -g repodata/*comps.xml .
mkisofs -o /tmp/CentOS-6.4_64_auto.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -joliet-long -R -J -v -T /tmp/iso/